Spares / Spares by Brand / DSE Deep Sea Electronics / DSE Generator Control Modules
Synchronising & Load Sharing Auto Mains (Utility) Failure Control Module.
The DSE8620 is an intelligent mono display auto mains (utility) failure load share control module packed with industry leading features to enhance paralleling single gensets with a mains (utility) supply.
The DSE 8620 automatically controls the change over between mains (utility) and generator power and can also be configured to run a generator in synchronisation with a mains (utility) supply.
Specifications | |
---|---|
DC SUPPLY | |
Continuous Voltage Rating | 8 V to 35 V Continuous |
Cranking Dropouts | Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. |
Maximum Operating Current | 460 mA at 12 V, 245 mA at 24 V |
Maximum Standby Current | 375 mA at 12 V, 200 mA at 24 V |
Charge Fail/Excitation Range | 0 V to 35 V |
OUTPUTS | |
Output A (Fuel) | 15 A DC at supply voltage |
Output B (Start) | 15 A DC at supply voltage |
Outputs C & D | 8 A 250 V (Volt free) |
Auxiliary Outputs E, F, G, H, I & J | 2 A DC at supply voltage |
GENERATOR & MAINS | |
Voltage Range | 15 V to 333 V AC (L-N) |
Frequency Range | 3.5 Hz to 75 Hz |
MAGNETIC PICK UP | |
Voltage Range | +/- 0.5 V to 70 V |
Frequency Range | 10,000 Hz (max) |
BUILT IN GOVERNOR AND AVR CONTROL | |
Minimum Load Impedance | 1000Ω Fully isolated |
Gain Voltage | 0 V to 10 V DC Fully isolated |
Offset Voltage | +/- 10 V DC Fully isolated |