Generators & Power / Transfer Panels
630A MAXiATS Automatic Transfer Switch with Logic Controller (MAXIATS630)
- Oil
- Run-Up
- Load Tested
- Filled with oil at no extra cost
- Run & load tested to rated capacity
- Ready to use as soon as you receive it
MAXiATS630 Automatic Transfer Switch is a PC class three-section automatic transfer switching device, mainly used for operating and transferring between two power supply systems (Main and Backup power) with AC 50Hz, rated voltage 415V and below. Its particular power monitoring device can detect the difference between two power sources and make the transfer between two power sources when it matches the transfer conditions. Also can send generator start and stop control signals as per requirement.
Automatic Transfer Switch (ATS) senses when mains power is lost or if the voltage is outside acceptable limits, automatically starts the generator to power your equipment. When it senses power has returned and is stable, it transfers the equipment back onto mains power and shuts the generator down, so it is ready for the next time there is a power issue.
Note: Suitable for indoor use only.
Features
- Fully Automatic
- Auto and Manual Operation
- Reliable Mechanical Interlock Device
- Built-in Phase Fail Protection
- Incorporates Electronic Circuit Breakers
- Mechanical operation x 10,000 times
- 12 Months RTB Warranty
| Specifications | |
|---|---|
| Rated Voltage (V) | 415 |
| Rated Current (A) | 630 |
| Phase | 3 |
| Pole | 4P |
| Frequency | 50 Hz |
| Weight (kg) | 20kg |
| Dimensions (WxDxH) | 430 x 272 x 228 mm |
| Warranty (RTB) | 12 months |
